ASA Electronics SRS1000 - Manual (Page 8)

Hi Level
+
_ _
Hi Level In
LR RR RF LF
TV In
+
Radio TV
L R L
Speaker Out
R
_
Trigger
Line In
SW2
SW1 RF RR
LR LF DC
Made in China is a trademark of SRS Labs, Inc.
Rear panel view
Rear panel description:
1. Radio, high level speaker input. Using the included 8 pin wire
harness, connect the speaker output of the radio to SRS1000.
Follow connection diagram on page 4. Do not use this input
simultaneously with Radio Line In.
2. TV In, High Level -- This input is to be used only with monaural
TV's (non-stereo) that do not have variable, stereo, line level out
put. If this input is used, no connection should be made to Line In,
TV. Doing so would cancel the SRS 3D effect.
3.Line in, TV--Connect to Stereo TV variable line level out put .
Do not connect any cable to the TV In ,Hi Level Jack if this input is
used .
4.Line in ,Radio--Connect to variable line output from radio (if
available). Do not connect the 8 pin harness to the SRS1000 if this
input is used.
5.Main Connection Input. Use included 16 pin wire harness to
apply power, TV mode trigger, and all speaker outputs though this
connection. Refer to page 4 for details.
Front/Rear Panel Description (2)
SRS1000 Theater Sound Owner's Manual SRS1000 Theater Sound Owner's Manual
----- 3 -----
Car Radio/Tape