Electrolux ENG2913AOW - Manual (Page 25)

FASTFREEZE MODE
To switch on the function:
1. Select the freezer compartment.
2. Press the Mode button until the corre-
sponding icon appears.
The FastFreeze indicator flashes for
few seconds.
This function stops automatically after 52
hours.
To switch off the function before its auto-
matic end:
1. Select the freezer compartment.
2. Press the Mode button until the Fast-
Freeze indicator flashes.
3. The FastFreeze indicator goes off.
The function switches off by select-
ing a different freezer set tempera-
ture.
DRINKSCHILL MODE
The DrinksChill mode is to be used to set
an acoustic alarm at the preferred time,
useful for example when a recipe requires
to cool down a mixture for a certain period
of time, or when a reminder is needed in
order not to forget the bottles placed in the
freezer for fast cooling.
To switch on the function:
1. Press the DrinkChill button.
The DrinksChill indicator appears.
The Timer shows the set value (30 mi-
nutes).
2. Press the Temperature colder button
and Temperature warmer button to
change the Timer set value from 1 to
90 minutes.
3. The Timer start to flash (min).
At the end of the countdown the DrinksChill
indicator flashes and an audible alarm
sounds:
1. Remove any drinks contained in the
freezer compartment.
2. Press the DrinkChill button to switch
off the sound and terminate the func-
tion.
It is possible to deactivate the function at
any time during the countdown:
1. Press the DrinkChill button.
2. The DrinksChill indicator goes off.
It is possible to change the time during the
countdown and at the end by pressing the
Temperature colder button and the Tem-
perature warmer button.
HIGH TEMPERATURE ALARM
An increase in the temperature in the freez-
er compartment (for example due to an
earlier power failure) is indicated by:
• flashing the alarm and freezer tempera-
ture indicators
• sounding of buzzer.
To reset the alarm:
1. Press any button.
2. The buzzer switches off.
3. The freezer temperature indicator
shows the highest temperature
reached for a few seconds. Then show
again the set temperature.
4. The alarm indicator continue to flash
until the normal conditions are re-
stored.
When the alarm has returned the alarm in-
dicator goes off.
DOOR OPEN ALARM
An acoustic alarm will sound if the door is
left open for a few minutes. The door open
alarm conditions are indicated by:
• flashing Alarm indicator
• acoustic buzzer
When normal conditions are restored (door
closed), the alarm will stop.
During the alarm, the buzzer can be
switched off by pressing any button.
FREESTORE MODE
To switch on the function:
1. Press the Mode button until the corre-
sponding icon appears.
The FreeStore indicator flashes for few
seconds.
2. The FreeStore indicator is shown.
To switch off the function:
1. Press the Mode button until the Free-
Store indicator flashes.
2. The FreeStore indicator goes off.
ENGLISH 25