Connecting your device, Connecting a video device, Connecting a tv source – Adaptec AVC-2410 User Manual
Page 28
20
Connecting Your Device
Connecting Your Device
Follow these steps to connect your video device (VCR or
camcorder) or TV source (cable, satellite receiver, antenna, and so
on) to the AVC-2410.
Connecting a Video Device
Connect your video device to your AVC-2410 using the included
A/V cable or the proprietary cable that came with your device.
S-Video users can use an S-Video cable and the A/V cables
included in the VideOh! kit.
See the Figure on
if you need help locating the ports on your
AVC-2410.
Now you’re ready to CREATE. See
to create a video
project.
Connecting a TV Source
Connect your TV source to your AVC-2410 using a standard TV
cable.
Connect the Infrared cable to the cable port, then place the receiver
in an open area on or near your computer monitor. Ensure that the
Infrared signal from the remote control can reach the receiver.
Now you’re ready to CREATE. See
to create a TV project.