24" compact washer, Installation details, Enclosure dimensions – Bosch WAP24201UC User Manual
Page 3
For help and assistance with Bosch accessories please visit: www.bosch-eshop.com/eshop/bosch/us or call 1-800-944-2904 Mon-Fri 5am to 6pm PST Sat 6am to 3pm PST
Notes: All height, width and depth dimensions are shown in inches. Please refer to installation instructions prior to making cutout. BSH reserves the absolute and unrestricted right
to change product materials and specifications, at any time, without notice. Consult the product’s installation instructions for final dimensional data and other details. Applicable product
warranty can be found in accompanying product literature or you may contact your account manager for further details.
Warranties: Bosch warrants that the Product is free from defects in materials and workmanship for a period of three hundred and sixty-five (365) days from the date of purchase. The foregoing
timeline begins to run upon the date of purchase, and shall not be stalled, tolled, extended, or suspended, for any reason whatsoever. This Product is also warranted to be free from cosmetic
defects in material and workmanship (such as scratches of stainless steel, paint/porcelain blemishes, chip, dents, or other damage to the finish of the Product, for a period of thirty (30) days
from the date of purchase or closing date for new construction. This cosmetic warranty excludes slight color variations due to inherent differences in painted and porcelain parts, as well as
differences caused by kitchen lighting, product location, or other similar factors. This cosmetic warranty specifically excludes any display, floor, “As Is”, or “B” stock appliances.
For more information on our entire line of products, go to www.bosch-home.com/us or call 1-800-944-2904
© BSH Home Appliances Corporation. All rights reserved. Bosch is a registered trademark of Robert Bosch GmbH.
Installation Details
Installation Details
Axxis® - White WAP24201UC
24" Compact Washer
Closet: Stacked
Enclosure Dimensions
Clearance requirements
(Minimum)
A Both Sides
5/8 in.
B Top
6 1/4 in.
C Rear
3 1/4 in.
D Front
3 1/2 in.
Ventilation Area (Minimum)
E Top
63 sq. in
F Bottom
63 sq. in.
Vent Spacing
G
37 in.
H
26 in.
J
3 in.
K
29 in.
Closet: Stand Alone (shown)
or Side by Side
Enclosure Dimensions
Front of the appliance fully open.
No doors or coverings.
Under Counter: (Preferred)
If front of the appliance is covered,
ventilation openings must be installed.
Under Counter: (Less Preferred)
Minimum opening dimensions
a
23 7/8 in.
b
23 7/8 in.
c
33 1/2 in.
E & F are minimum area sizes
E
63 sq. in.
F
63 sq. in.
G & H actual spacing
dimensions for min. open
area sizes
G
3 in.
H
14 in.