Bosch SHE3AR52UC - Manual (Page 15)

13
Operating the Dishwasher
Start the dishwasher:
1
Press the On/Off button.
2
One of the wash cycle LEDs will be flashing. You can now select a wash cycle.
3
Press the Cycle Select arrow buttons to select the desired wash cycle.
4
Press Start to begin the cycle.
Delay start:
1
Press the On/Off button.
2
Select a cycle.
3
Press the Delay Start button. Release when the desired delay time is shown in the display window
or the appropriate LED is lit (depending on model).
4
Press Start to begin the cycle.
Cancel a cycle:
1
Press and hold Start for 3 seconds.
2
Wait about 1 minute until the “Clean” LED illuminates, indicating it is done draining.
3
Press the On/Off button. You may now start a new cycle.
Child Lock:
1
After starting a cycle you can activate the Child Lock.
2
Press and hold the < button until the “Child Lock” LED illuminates or “CL” appears on the display.
“CL” disappears from screen when button is released.
3
Child Lock is now active and buttons will not function, except On/Off.
4
To deactivate, press and hold the < button until the “Child Lock” LED turns off or “CL” disappears
from the display.
For models with display:
To enter options mode:
1
With the door closed, press the On/Off button to turn the unit on.
2
The countdown display and one of the wash cycle LEDs will be flashing.
3
Press and hold down the > button, then press and release the Start button. Now release the > button.
4
The “Sanitized” LED will be flashing. You are now in options mode.
5
Press the > button to select the option you would like to adjust.
To set amount of Rinse Aid:
Note: If your glasses have spots on them, you need more rinse aid. If your glasses have streaks on them, you
need less rinse aid.
1
Follow the prior instructions to enter options mode.
2
With the display showing “r:00” - “r:06” press the < button to change the amount of rinse aid dis-
pensed.
r:00 = rinse aid is OFF
r:03 = medium amount of rinse aid dispensed
r:06 = highest amount of rinse aid dispensed
3
Press Start to save your setting.
To turn Extra Dry Heat ON or OFF:
1
Follow the prior instructions to enter options mode.
2
With the display showing “d:00” or “d:01” press the < button to turn Extra Dry Heat ON or OFF.
d:00
= Extra Dry Heat is OFF
d:01
= Extra Dry Heat is ON
3
Press Start to save your setting.