Electrolux ESL6391RA - Manual (Page 29)

2. Press the on/off button to activate the
appliance.
3. Press the Program button again and
again to set a programme. If you want,
you can set the options applicable to
the programme. (If you want to set the
MyFavourite programme, press the
MyFavourite button).
• The display shows intermittently the
number and the duration of the pro-
gramme.
4. Close the appliance door. The pro-
gramme starts.
• If you open the door, the display
shows the programme duration.
Starting a programme with delay
start
1. Set the programme.
2. Press the Delay button again and
again until the display shows the delay
time you want to set (from 1 to 24
hours).
• The display shows intermittently the
programme number, the pro-
gramme duration and the delay
time.
• The Delay indicator comes on.
3. Close the appliance door. The count-
down starts.
• If you open the door, the display
shows the countdown of the delay
start.
• When the countdown is completed, the
programme starts.
Opening the door while the
appliance operates
If you open the door, the appliance stops.
When you close the door, the appliance
continues from the point of interruption.
Cancelling the delay start while
the countdown operates
When you cancel the delay start you have
to set the programme again.
Press and hold the Reset button until the
display shows the programme P1.
Cancelling the programme
Press and hold the Reset button until the
display shows the programme P1.
Make sure that there is detergent
in the detergent dispenser before
you start a new programme.
At the end of the programme
1. Press the on/off button or wait for the
Auto Off function to automatically de-
activate the appliance.
2. Close the water tap.
• Let the dishes become cold be-
fore you remove them from the
appliance. Hot dishes can be
easily damaged.
• First remove the items from the
lower basket, then from the up-
per basket.
• There can be water on the
sides and on the door of the
appliance. Stainless steel be-
comes cool more quickly than
the dishes.
8. HINTS AND TIPS
8.1 The water softener
Hard water contains a high quantity of
minerals that can cause damage to the
appliance and bad washing results. The
water softener neutralises these minerals.
The dishwasher salt keeps the water soft-
ener clean and in good conditions. It is
important to set the right level of the water
softener. This makes sure that the water
softener uses the correct quantity of dish-
washer salt and water.
ENGLISH 29