1 activating and deactivating, 2 automatic switch off, 3 the heat setting – Electrolux EHF6747FOK User Manual

Page 8: 4 activating and deactivating the outer rings, 5 automatic heat up, Daily use

4. DAILY USE

WARNING!

Refer to Safety chapters.

4.1 Activating and deactivating

Touch for 1 second to activate or

deactivate the hob.

4.2 Automatic Switch Off

The function deactivates the hob

automatically if:
• All cooking zones are deactivated.

• You do not set the heat setting after

you activate the hob.

• You spill something or put something

on the control panel for more than 10

seconds (a pan, a cloth, etc.). An

acoustic signal sounds and the hob

deactivates. Remove the object or

clean the control panel.

• You do not deactivate a cooking zone

or change the heat setting. After some
time comes on and the hob

deactivates. See below.

The relation between heat setting and

times of the function:

•

1 — 3 — 6 hours

•

4 — 7 — 5 hours

•

8 — 9 — 4 hours

•

10 — 14 — 1.5 hours

4.3 The heat setting

To set or change the heat setting:
Touch the control bar at the correct heat

setting or move your finger along the

control bar until you reach the correct heat

setting.

4.4 Activating and deactivating

the outer rings

You can adjust the surface you cook to

the dimension of the cookware.

Use sensor field:
To activate the outer ring: touch the

sensor field. The indicator comes on.
To activate more outer rings: touch the

same sensor field again. The subsequent

indicator comes on.
To deactivate the outer ring: touch the

sensor field until the indicator goes out.

When you activate the zone

but do not activate the outer

ring the light that comes out

from the zone may cover the

outer ring. It does not mean

that the outer ring is

activated. To see if the ring is

activated check the indicator.

4.5 Automatic Heat Up

If you activate this function you can get a

necessary heat setting in a shorter time.

The function sets the highest heat setting

for some time and then decreases to the

correct heat setting.

To activate the function the

cooking zone must be cold.

To activate the function for a cooking
zone: touch

( comes on).

Immediately touch the correct heat
setting. After 5 seconds comes on.