Asus CUSL2-M - Manual (Page 20)

20 ASUS CUSL2-M User’s Manual
3. HARDWARE SETUP
Motherboard Settings
3. H/W SETUP
4) Onboard Audio CODEC Setting (AUD_EN1)
(available on audio model only)
The onboard audio CODEC may be enabled or disabled using all of these jump-
ers. Disable the onboard audio CODEC if you are using an ISA or PCI audio
card on any of the expansion slots or a primary audio/modem CNR on a CNR
slot (see CNR Slot later in this section). If using a PCI audio expansion card,
Onboard AC97 Audio Controller in 4.4.2 I/O Device Configuration must
also be disabled.
Setting AUD_EN1
Enable [1-2] (default)
Disable [2-3]
5) Onboard LAN Setting (LAN_EN)
The onboard LAN may be enabled/disabled with this jumper.
Setting
LAN_EN
Enable [1-2] (default)
Disable [2-3]
CUSL2-M ®
CUSL2-M On Board Lan Setting
Enable
(default)
Disable
1 2 2 3
LAN_EN