Audiovox pro 9276 User Manual
Page 3
128-7855
3 of 20
3
To exit program mode, turn ignition off, or press and release valet switch.
RF Programmable Features Bank 3 Is Remote Start Selectable Features:
Feature Selection
1 Chirp
2 Chirps
3 Chirps
4 Chirps
5 Chirps
6 Chirps
1st Defrost Output
Pulsed
10 Mins
2nd RF Start Chirp
Off
On
On & Car Finder
3rd Run Time
5 Mins
10 Mins
15 Mins
20 Mins
4th Parking Lights
On Steady
Flashing
5th Input Check
Voltage
Tach
DBI Tach
6th Voltage Level
>0.5V B4 Start
< 0.5V B4 Start
7th Ign. 2 Select
Off During Crank
On During Crank Same As Accy.
8th Ign. 3 Select
Off During Crank
On During Crank Same As Accy
Same As Starter
9th Diagnostics
Off
On
10th Crank Time
0.8 Sec
1.0 Sec
1.5 Sec
2.0 Sec
11th Gas/Diesel
Gas
Diesel 10
Diesel 15
Diesel 20
12th Transponder O/P
While R/S On
During Start
Until Ign. Off
13th Temp Start
Not Available
14th Crank Averaging
Averaging
Preset Time
Note: When averaging, the engine must be started 4 times with the key to be effective.
15th R/S Shock
Not Available
16th Turbo Select
Off
3 Mins
5 Mins
10 Mins
17th Black/Blue (Aux O/P)
Single Pulse
As Feat #1 Bank 2
When using the RF programmer, enter the program mode as follows:
Turn the ignition on.
Press and release valet switch 3 times;
turn ignition off then on.
Press and hold valet switch for 5 seconds.
Siren chirps 2 times indicating access to RF feature program mode.
To exit program mode, turn ignition off, or press and release valet switch.