Controls lighting – Electrolux EFL10550DX User Manual
Page 5
5
english
ControLs
LiGHtinG
Button Function
Display
t1
Turns the suction motor on and off at speed
one.
Displays the set speed
press and hold the button for approximately 5 sec-
onds, with all the loads turned off (Motor and Lights),
to turn the activated charcoal Filter alarm on/off.
-
C flashes once , a.c. Filter alarm activated
-
C flashes twice, a.c. Filter alarm Deactivated
t2
Decreases the working speed.
Displays the set speed
When the filters alarm is triggered, the alarm can
be reset by pressing and holding this button for
approximately 3 seconds. These indications are only
visible when the motor is turned off.
F indicates the need to wash the metal grease
fil-ters. the alarm is triggered after the Hood has
been in operation for 100 working hours.
C indicates the need to change the activated
char-coal filters, and also to wash the metal
grease filters. the alarm is triggered after the
Hood has been in op-eration for 200 working
hours.
t3
increases the working speed.
Displays the set speed
t4
activates power speed from any other speed,
including motor off. This speed is set to operate
for 10 minutes, after which the system returns
to the speed that was set before. suitable to
deal with maximum levels of cooking fumes.
Displays
P.
l
turns the lighting system on and off at maxi-
mum intensity.
T1
T2
T3
T4
L