Abbott Freestyle PRT03831-xxx - Manual (Page 143)

Steps Do This
3.
Link your receiver to your
transmitter.
a. Place the receiver within 10 feet of the transmitter.
b. Press the RIGHT Option button twice to display the
Main menu.
c. Use the UP or DOWN Arrow button to highlight
System.
d. Press the RIGHT Option button (Select) to display the
System menu.
e. Use the UP or DOWN Arrow button to highlight Link.
f. Wait while the receiver searches for the transmitter.
Note: It may take the receiver up to 70 seconds to find
the transmitter.
Result: The receiver displays the transmitter’s ID number.
4.
Check your work.
Result: A linked or unlinked transmitter and receiver. You
have done this procedure correctly when:
o Your system is linked when you wanted it linked.
o Your system is unlinked when you wanted it unlinked.
o You called Customer Care after your 2nd attempt to
link failed.
o The ID number of the transmitter displayed by the
receiver (under the Transmitter Status menu item)
matches the ID on the transmitter label.
END OF Section 14
• Are the same. ➜ 1. Press the RIGHT Option
button (Yes).
Result: The Main menu is
displayed.
2. Go to Step 4.
• Are NOT
the same.
1st attempt Press the Left Option button
(No). The receiver will continue
to search for another transmitter
in the vicinity.
2nd attempt Call Customer Care.
If the And this
Then
ID numbers is your
Verify that the ID
number displayed
on the screen is
the same as the
ID number on the
bottom of your
transmitter. Caution: If you accept an incorrect transmitter ID when
linking your Transmitter and Receiver, your glucose
readings will be incorrect.
Section 14 133
Link and Unlink Your Transmitter and Receiver
Link 08:30A
Searching For
Transmitter
Allow 70 Seconds
Cancel
Link 08:30A
Transmitter ID:
AAAF293-80359
located
Is this yours?
No Yes