Before first use, Daily use, 9 permanent extra rinse – Electrolux EWF1286GDW User Manual
Page 12: 10 acoustic signals, 1 loading the laundry
• To activate/deactivate the option,
press
and
at the same time
until the indicator
comes on/goes
off.
You can activate this option:
• After you press
, the options and
the programme knob are locked.
• Before you press
: the appliance
cannot start.
7.9 Permanent extra rinse
With this option you can permanently
have an extra rinse when you set a new
programme.
• To activate/deactivate this option
press
and
at the same time until
the indicator
comes on/goes off.
7.10 Acoustic signals
The acoustic signals operate when:
• The programme is completed.
• The appliance has a malfunction.
To deactivate/activate the acoustic sig-
nals, press
and
at the same time
for 6 seconds.
If you deactivate the acoustic sig-
nals, they continue operate when
the appliance has a malfunction.
8. BEFORE FIRST USE
1.
Put 2 litre of water in the detergent
compartment for washing phase. This
activates the drain system.
2.
Put a small quantity of detergent in
the compartment for washing phase.
3.
Set and start a programme for cotton
at the highest temperature without
laundry. This removes all possible dirt
from the drum and the tub.
9. DAILY USE
9.1 Loading the laundry
1.
Open the appliance door.
2.
Put the laundry in the drum, one item
at a time. Shake the items before you
put them in the appliance. Make sure
not to put too much laundry in the
drum.
3.
Close the door.
CAUTION!
Make sure that no laundry stays
between the seal and the door.
There is a risk of water leakage or
damage to the laundry.
12 www.electrolux.com