Electrolux EXI18HL1WE - Manual (Page 9)

8
Installation
Step 1: Installation of Mounting Plate
1 Fit the mounting plate horizontally on the wall
ZLWK¿YHRUPRUHVHOIWDSSLQJVFUHZVW\SH
67[LWHPRQSDJH
2 Be sure that the mounting plate has been
¿[HG¿UPO\HQRXJKWRZLWKVWDQGDERXWNJ
Meanwhile, the weight should be evenly shared
by every screw.
3 If the wall is made of brick, concrete or the like,
GULOO¿YHRUVL[KROHVRIPPGLDPHWHULQ
the wall. Insert clip anchor (item 2 on page 3)
for appropriate mounting screws.
The water tray’s outlet for the indoor unit is two-
way drainage design. During installation, the
indoor unit should slightly slant to water tray’s
outlet for smooth drainage of condenser water.
Fit the mounting plate and drill holes in the wall
according to the wall structure and correcponding
mounting points on the mounting plate.
(dimensions are in mm unless otherwise stated)
Mark on the middle of it Gradienter
PP
above
Space
to the
wall
PP
above
Wall
Wall
Left Right
Mounting Plate Type A
Mounting Plate Type B
Model Number
Indoor Unit
Dimension mm
(WxDxH)
Mounting
Plate Type
EXI09HL1W-A1 [[ A
EXI12HL1W-A1
[[
B
EXI09HL1W-A2
[[
B
EXI12HL1W-A2 [[ B
EXI18HL1W-A2 [[ C
Space
to the
wall
PP
above