Cleaning and care, Cleaning the exhaust filters, Surface light replacement – Electrolux EI30BM60MS User Manual
Page 23

NOTES
CAUTION
CAUTION
E
CLEANING AND CARE
Disconnect the power cord before cleaning or leave the door open to deactivate
the oven during cleaning.
ORM 2.0 Bottom [TINSEB310WRRZ] [31 31
ORM 2.0 Bottom [TINSEB310WRRZ] [31 31
10/19/10 1:21:44 PM
10/19/10 1:21:44 PM
23
Front
Rear
To avoid risk of personal injury or property damage,
t
operate oven
hood
without f
ilters
properly in
Cleaning
the
exhaust
filters
The oven ventilation exhaust filters should be removed and
cleaned often; generally at least once every month.
1. To remove the exhaust ventilation filters, pull the
hen pull filter downward .The filter will drop out .
Repeat for the 2nd filter.
2. Soak the ventilation filters in hot water using a mild
detergent. Rinse well and shake to dry. or wash
3. To reinstall the exhaust ventilation filter, infix the
hooks into the holes of base plate, then pull the
lever and
toward
oven to
lock
.
Reinstall
the
2nd
filter
using
the same procedure.
Surface lights
Ventilation
filters
Surface
light
replacement
To avoid risk of personal injury or property damage,
ves when replacing the light bulbs.
1. Unplug the microwave oven or turn off power at the
t breaker.
2. Remove the bulb cover mounting screws at light
positions under the microwave.
3. Replace bulb with 40 watt appliance bulb.
4.
5. Plug the microwave back into the power supply or
power back on at the main circuit breaker.
Re-install bulb cover and mounting screw.
lever, t
main circui
turn the
wear glo
place.
do no
ventilation filters in dishwasher. It is best to place
in upper rack of dishwasher for cleaning.
Do not use ammonia cleaner. The ammonia
cleaner may corrode and darken the
aluminum on the filter.