Electrolux EI30ES55LW - Manual (Page 35)

35
Electronic Control Settings
USER PREFERENCES
(CONTINUED)
AUDIO CONTROL
The Audio Control feature allows the oven control to be operated without sounds or beeps
whenever necessary. If desired the control can be programmed for silent operation and later
returned to operating with all the default sounds and beeps. The volume of the beeps can
also be adjusted.
To change the audio mode or audio volume:
1. Press USER PREF until you get to the AUd menu page.
2. Press
+
hi or
-
lo to toggle between the available volume settings. AUd 5 for the highest
volume setting to AUd 1 for the lowest volume. AUd OFF to disable the beeps.
3. Press START to accept the changes and go back to user preferences menu display.
ADJUSTING OVEN TEMPERATURE
The temperature in the oven has been pre-set at the factory. When fi rst using the oven, be
sure to follow recipe times and temperatures. If you think the oven is too hot or too cool,
the temperature in the oven can be adjusted. Before adjusting, test a recipe by using a
temperature setting that is higher or lower than the recommended temperature. The baking
results should help you to decide how much of an adjustment is needed. Each oven can be
individually adjusted.
To adjust the oven temperature:
1. Press USER PREFERENCES until you get to the UPO menu page.
2. To select the oven you want to adjust, press USER PREFERENCES again to toggle
between the upper and the lower display.
3. Enter the temperature by pressing the
+
hi or
-
lo pads. The temperature can only be
adjusted by ± 35°F.
4. Press START to accept the changes and go back to user preferences menu display.
RE-SETTING TO DEFAULT FACTORY SETTINGS
The oven control can be set to return to its original factory settings. This includes: Setting the
Clock ON/OFF to ON, Setting the clock display mode to 12h, Display mode to Fahrenheit,
Setting the oven temperature adjustment to zero, Setting audio level to 5 and Enabling the
12h energy saving mode. Reseting the control also erase the My Favorite recipes.
To reset the oven control to its original settings:
1. Press USER PREF until you get to the rSt no menu page.
2. Press
+
hi or
-
lo to select YES.
3. Press START to reset to default factory settings.