Cooking modes, Multi stage – Electrolux EW30GS65GS User Manual
Page 33
33
Cooking Modes
Multi staGe
This feature enables you to perform sequential cooking at the touch of a button. Its purpose is
to program a queue of up to three cooking modes with individual cooking time and temperatures
in a sequence. This feature can be used with most cooking modes; Baking, Broiling, Convection
Baking, Convection Roasting, Convection Broiling, Keep Warm and Bread Proof. A Cook
Time can be programmed with your cooking mode and then queued. An auto-suggested set
temperature outputs in the display as a default value during the set temperature programming.
Any stage programmed with Broil or Convection Broil cannot last longer than 10 minutes. A
proper cook time and a set temperature are required for every stage programming. At least
two stages must be programmed before a Multi-Stage cooking operation starts. During stage
1 cooking the electronic control provides temperature visual output in the display. During stage
2 and 3, the electronic control displays the set temperature only.
to set a Multi stage sequence
(Timed Convection Bake, Timed Broil, Keep Warm)
:
1. Arrange interior oven racks and place food.
2. Select oven by pressing
UPPER OvEN
UPPER
OVEN
.
3. Press
MULTI STAGE
.
stage 1
4. Press
CONvECTION BAKE
. “
350” will flash in the display prompting to enter a
temperature.
5. Enter a temperature using the numeric pads
0
to
9
.
6. Press
START
. “
00:00” will start flashing in the display prompting to enter a cook time.
7. Enter a cook time using the numeric pads
0
to
9
.
8. Press
START
. The Multi-Stage indicator will now display the 2nd stage.
stage 2
9. Press
BROIL
. “
550” will start flashing in the display prompting to enter a
temperature.
10. Enter a temperature using the numeric pads
0
to
9
.
11. Press
START
. “
00:00” will start flashing in the display prompting to enter a cook
time.
12. Enter a cook time using the numeric pads
0
to
9
.
13. Press
START
. The Multi-Stage indicator will now display the 3rd stage. If a third stage
is not needed, press
START
a second time. This will start the cooking sequence.
read next page for stage 3 and canceling details