Asus K8V-XE - Manual (Page 82)

3-8 Chapter 3: Software support
3.3.3 JMicron RAID configurations
The JMicron RAID controller supports RAID 0 and RAID 1 configurations. Use the
JMicron RAID utility to configure a disk array.
Setting BIOS RAID items
After installing the hard disk drives, make sure to set the necessary RAID items in
the BIOS before setting your RAID configuration.
To set the BIOS RAID items:
1. Boot the system and press during the Power-On Self-Test (POST) to
enter the BIOS Setup Utility.
2. Go to the Advanced > Onboard Devices Configuration > JMicron RAID
controller menu item in the BIOS.
3. Make sure that the JMicron RAID controller item is set to RAID.
4. Save your changes and Exit Setup.
Entering JMicron RAID BIOS Utility
To enter the JMicron RAID BIOS utility:
1. Boot your computer.
2. During POST, press + J to enter the JMicron RAID configuration utility.
For detailed descriptions on the JMicron RAID configuration, refer to the
“JMicron JMB36X RAID BIOS User’s Manual” found in the Manual menu of your
motherboard support CD. See page 3-5.