3) adjusting the picture size and position, ᕣ adjusting the picture size and position – Acoustic Energy LT35 User Manual
Page 28
20
3. Projecting an Image (Basic Operation)
Place your projector on a flat level surface and ensure that the
projector is square to the screen.
Lift the front edge of the projector to center the image vertically.
*
If the projected image does not appear square to the
screen then use the Keystone feature for proper adjust-
ment. (
→ page
ᕣ Adjusting the Picture Size and Position
About Auto Focus
Just placing the projector on a flat level surface makes a focused
image. (
→ page
Move the projector left to center the image hori-
zontally on the screen.
About Auto Keystone Correction
Adjusting the height of a projected image or changing the pro-
jection angle will result in the Auto Keystone function to work to
quickly correct the vertical distortion. (
→ page