ATON DH44 - Manual (Page 20)

18 ©2008 • All rights reserved.
DH44 4 Source, 4 Zone Digital Audio Router
ZONE OUT
The ZONE OUT RJ-45 connectors interface with DHTP1 Amplifi ed Touch Pad Controllers
through Cat-5 cables wired to the T-568A Standard. These connectors carry IR information
from the Touch Pads as well as audio information to the Touch Pads. Status information is also
carried between the DH44 chasssis and the Touch Pads. While a great deal of information is
handled by the ZONE OUT connections, the connections are straightforward. Simply connect
Cat-5 cables terminated to the T-568A confi guration (Figure 3-8) from each Touch Pad to the
corresponding ZONE OUT connector as shown in Figure 3-9.
Note: For wire runs up to 150', the Cat-5 connections are all that is necessary. For wire
runs over 150', use the AUX POWER OUT connectors as described in the section entitled
Auxiliary Power Connector (AUX POWER OUT).
1 2 3 4 5 6 7 8
1 2 3 4 5 6 7 8
GREEN/WHITE
GREEN
ORANGE/WHITE
BL
UE
BL
UE/WHITE
ORANGE
BR
O
WN/WHITE
BR
O
W
N
Shown tab
down
Figure 3-8: T-568A Wiring Standard
Cat-5
Cat-5
Cat-5
Cat-5
DHTP1 Rear
DHTP1 Rear
DHTP1 Rear
DHTP1 Rear
DH44
L+ L- R+ R-
SPEAKERS PWR IN
+ -
L+ L- R+ R-
SPEAKERS PWR IN
+ - L+ L- R+ R-
SPEAKERS PWR IN
+ -
L+ L- R+ R-
SPEAKERS PWR IN
+ -
Figure 3-9: ZONE OUT Connections