Brother DCP-8045D - Manual (Page 39)

36
Installing the Driver & Software
Make sure that you have completed the instructions from Step 1 “Setting Up
the Machine” on pages 2 - 5.
1
Make sure that the NC-9100h (Network
Print/Fax Server) is installed into the DCP.
(See Optional accessories in Chapter 8 of
the User's Guide.)
2
Turn off and unplug the DCP from the AC
outlet and disconnect it from your
Macintosh
®
if you already connected an
interface cable.
3
Turn on your Macintosh
®
.
4
Insert the supplied CD-ROM into your
CD-ROM drive.
5
Double-click the Start Here OS 8.6-9.2 icon
to install the printer and scanner drivers. If
the language screen appears, select your
language.
6
Click MFL-Pro Suite to install.
7
Follow the on-screen instructions, and
restart your Macintosh
®
.
8
Connect the network interface cable to the
DCP, and then connect it to a free port on
your hub.
9
Plug in the power cord and turn on the DCP.
For Network Interface Cable Users
For Mac OS
®
8.6 to 9.2
Step 2