Atlantis Land A02-IPCAM-W54 - Manual (Page 19)

ENGLISH
19
Connect an Ethernet cable to the network cable connector
located on the Wireless Internet Camera’s rear panel, and
then attach it to the network. Attach the external power
supply to the DC power input connector located on Wireless
Internet Camera’s rear panel, and then connect it to your
local power supply.
Confirm power source is supplied from the LED indicators
label Power on the Wireless Internet Camera is illuminated.
1.5 Default Settings
Before you configure this IP (wireless) Security Cam, you
need to know the following default settings:
• Password:
• Userneme:
• IP address : 192.168.0.20
• SSSID= Null String , Channel=11