Antec DARK FLEET DF-35 - Manual (Page 20)

20
One example of AHCI configuration – your motherboard may vary
B. L OADING THE F LEET -S WAP BAYS
Fleet-Swap™ bays are designed to be accessible from the front of the case, through the Fleet-Release™ access
doors.
1. Open the Fleet-Release™ access door, and insert your 3.5” SATA device into a 3.5” drive bay that
contains a Fleet-Swap bay at the back.
2. Push gently until it engages the adapter pins on the Fleet-Swap bay and stops in position. Do not
secure the device with screws if you want it to be removable.
Loading a Fleet-Swap drive.
3. Mount any other 3.5” HDD devices accordingly.
4. Close the Fleet-ReleaseTM Access Door.
C. U NLOADING THE F LEET -S WAP ™ BAYS
1. Ensure that your HDD is not in use.
2. Open the Fleet-Release TM Access Door by pressing the left side to release it, and then swing it open.