Asus External USB Audio Station Xonar U1 - Manual (Page 45)

39 ASUS Xonar U1
Why couldn’t PMP Lite convert some music files successfully?
Instructions:
1. Make sure you have installed Windows Media Player 9 or above version,
and MP3 encoder in your PC. (following the pop-up downloading information
to finish the installation. To download free MP3 encoder, go to: http://www.
elecard.com/download/#freeware/ )
2. PMP Lite supports MP3, WMA, WAVE, CD source formats.
3. PMP Lite can’t support DRM protected content.
4. Currently PMP Lite only support common 16 bit audio sources. If you have 24
bit sources, please try converting it into 16bit formats first with some software
editing tool (Ableton Live, Cakewalk, CoolEdit, Soundforge, etc.)
I cannot hear any audio when I use a 32-bit program to play a DVD
movie in a 64-bit version of Window s Vista
Instructions:
1. This problem may occur if the 32-bit program outputs Sony/Philips Digital
Interface Format (S/PDIF) raw data to the audio playback device by using the
WaveCyclic miniport driver.
2. For more detail information, refer to http://support.microsoft.com/kb/936225/
en-us
Xonar U1 audio center or the driver did not run up when i plugged U1
into the USB port
Instructions:
1.
If you installed a beta driver, you need to make sure you have plugged U1
into the originally connected USB port when you installed the driver. (With
a Microsoft WHQL certified driver, Windows will automatically indentify U1
device and activate the driver.) Otherwise, install the U1 driver again for the
new port. Before you install U1 driver, U1 will still work with Microsoft default
USB audio driver for basic playback/recording functions.
2. If you have connected U1 into the right port, go to the Start menu=>
Settings => Control Panel. Check Xonar U1 Audio Center icon exist and
double click it to reload it.
3. Try to unplug and plug U1 again into the same or other USB port and wait a
minute for Windows detection and loading driver.
4. If the driver is still not back, keep U1 into the USB port and just re-install the
driver package from the Xonar U1 driver CD.