UEi Test Instruments CO95 - Manual (Page 3)

3
INTrOduCTION
The CO95 is configured with a long-life CO sensor. The CO95 meter tests CO levels in heating
appliances, ambient air, around fossil fueled appliances like cookers and grills. It also helps you test
residential and commercial CO alarms and also shows CO MAX - the maximum level of CO measured.
The CO95 can also be used as a digital thermometer, ideal for testing hot water or refrigeration.
FEATurES INCLudE
• Long-life (5 years) CO sensor
• Measure ambient CO levels
• Measure CO concentration in flue gas
• CO Max capture
• CO accurate to ±5% of reading
• Temperature measurement
• Auto-zero at power up
• Link to optional infrared printer
SAFETy NOTES
Before using this meter, read all safety information carefully. In this manual the word “WArNINg” is used
to indicate conditions or actions that may pose physical hazards to the user. The word “CAuTION” is used to
indicate conditions or actions that may damage this instrument.
WArNINg! This meter extracts combustion gases that may be toxic in relatively low
concentrations. These gases are exhausted from the back of the instrument. This meter must only be
used in well-ventilated locations by trained and competent persons after due consideration of all the
potential hazards.