Transmille EA3023 User Manual
Page 9
EA3023 3A POWER SUPPLY CALIBRATION ADAPTER
OPERATION MANUAL
Transmille Ltd.
Page 8
Using the EA3023 with the
Virtual Front Panel Software
Installing the Software
Insert the CD supplied with the EA3023 PSU Adapter – this should auto run. If it
does not auto run, click START -> Run then run x:\Setup.exe where x is the drive
letter of your CD drive.
Once installation is complete choose START -> ALL PROGRAMS -> EA3023 PSU
Adapter to run the virtual front panel
Selecting a COM Port
On starting the virtual front panel for the first time, a COM port selection screen will
be displayed. Click on the COM port which is connected to your 3000 Series
calibrator to continue.
A different COM port can be selected at any time using the
button.
If you are using a laptop to connect to the calibrator, the COM port will
usually be COM 1. A desktop computer will usually be COM 2