Enter – Transmille EA003 User Manual
Page 7
EA003 OPTICAL TACHOMETER CALIBRATION ADAPTER
OPERATION MANUAL
Transmille Ltd.
Page 6
Optical Tachometer Calibration Option Operation
The optical tachometer calibration option allows the user to enter a value directly in RPM
and use the calibrator to control the optical tachometer adapter. The integrated LED is
pulsed at the required frequency to simulate the RPM value entered.
1.
Use the calibrator keypad to key in the required RPM, for example 3500 :
Note : Valid RPM settings are from 240 RPM to 60,000 RPM
Ensure the calibrator output is turned ON by pressing the
key.
Note : The LED in the top left hand corner of the Output ON key will illuminate and
the display will indicate ON in the left hand corner.
RPM Setting
Output status
(On / Standby)
Output
ON
3
5
0
ENTER
0