Audiovox PEQ-200 - Manual (Page 8)

-8-
9
HI-MID 2kHz CONTROL
Rotate this control counterclockwise (minimum) or clockwise
(maximum) to adjust the system high mid-range cut or boost,
respectively, between -12dB and 12dB at the frequency of
2kHz.
bl
TREBLE 10kHz CONTROL
Rotate this control counterclockwise (minimum) or clockwise
(maximum) to adjust the system treble cut or boost,
respectively, between -12dB and 12dB at the frequency of
10kHz.
bm
AUX INPUT JACK
This jack can be used with a portable CD (or MP3) stereo player
by connecting an audio patch cable with a standard 1/8"
phono plug (available at most radio supply stores). Attach the
audio output from the CD/MP3 player to the AUX IN jack. This
external input will automatically override the input from the
existing stereo source. To resume play of the existing stereo,
simply remove the patch cable from the AUX IN jack.
bn
INPUT R/L CONNECTORS
These connectors accept the stereo output signal from the
external audio source, such as a radio.
bo
INPUT LEVEL ADJUSTMENT
This rear panel control provides a sensitivity screwdriver
adjustment which matches the input sensitivity of the unit to
the level of the output signal from the stereo source.
4
FADER FRONT/REAR CONTROL
Rotate this control clockwise (REAR) or counterclockwise
(FRONT) to favor the output from the rear or front speakers,
respectively; the sound output from the front or rear speakers
is thereby subdued. The control is detented at the center
position which provides equal front and rear speaker outputs.
5
VOL SUB MIN/MAX CONTROL
Rotate this control clockwise (MAX) or counterclockwise
(MIN) to adjust the subwoofer (SUB) output level at or below
the crossover frequency selected by the SUBWOOFER four-
position slide switch (item 20).
6
SUB 40Hz CONTROL
Rotate this control counterclockwise (minimum) or clockwise
(maximum) to adjust the subwoofer cut or boost between -12dB
and 12dB, respectively, at the frequency of 40Hz.
7
BASS 150Hz CONTROL
Rotate this control counterclockwise (minimum) or clockwise
(maximum) to adjust the system bass cut or boost be-
tween -12dB and 12dB, respectively, at the frequency
of150Hz.
8
MID 400Hz CONTROL
Rotate this control counterclockwise (minimum) or clockwise
(maximum) to adjust the system mid-range cut or boost
between -12dB and 12dB, respectively, at the frequency of
400Hz.