Audiovox D2011 - Manual (Page 20)

Installing The System Between Vehicle Seats
1. Take one strap and connect the latch to the upper metal ring on the left side of the
bag. Attach the “S” hook to the same ring after looping the strap around the
headrest of the driver’s seat. Repeat this process for the right side (Passenger
Seat).
2. Take another strap and connect the latch to lower metal ring on the left side of the
bag. Attach the “S” hook to the same ring after looping the strap around the
driver’s seat rail. Repeat this process for the right side. In some vehicles, it may
be necessary to attach the “S” connector directly to the rail, as it may not be long
enough to reach back to the ring.
3. Adjust the straps tightly so that the bag is secured.
- 19 -