JLab Audio Bouncer - Manual (Page 3)

3
Meet The Bouncer:
1 2 3
Front Buttons What to do:
Button 1 - Power / Mode One click will turn The Bouncer on. While on, this button acts as a Mode
button.
When speaker is on, click once to switch between Bluetooth and Aux mode.
Red light indicates power is on.
Hold down this button for up to 5 seconds to turn off the speaker.
Button 2 - Call Button When receiving a call, one click will answer the call and click again to end the
call.
The Blue indicator light on button.
Button 2 – Blue Indicator
Light
There is a blue indicator light that tells us when The Bouncer is in Bluetooth
mode.
When the blue light is blinking slowly, the speaker is in Bluetooth pairing
mode and ready to connect to a Bluetooth device.
If the blue light is not blinking and remains steady, the speaker is connected to
a Bluetooth device and is ready to play.
If the blue light is off, the speaker is in Aux mode.
Button 3 - Volume Control Use your own USB cord for charging your mobile and Bluetooth devices while
playing music.