JLab Audio Shaker - Manual (Page 5)

WHAT THE LIGHTS MEAN
Slow green LED flash – In Pairing Mode
Solid green LED light – Connected to smartphone and in standby mode
Quick green LED flash – Battery Low
CHECK THE BATTERY LIFE
1. The Shaker has a built-in rechargeable lithium battery. This can be charged by connecting the charge cable
to the Shaker and connecting the USB end to your computer.
2.
After charging, the Shaker can be used without the power connection. Charge the Shaker again when you
see the battery indicator blinking rapidly.
SPECS
AUDIO
Output Power 10w
Dual Passive Built-In Subwoofer
Built-in Microphone (IEEE 1329 Type 1-compliant speakerphone)
40Hz
–20kHz Frequency Response
Distortion 0.5%
BATTERY
On/Off Switch
Up to 10 hours continuous play
Built-in rechargeable lithium-ion battery
BLUETOOTH
Wireless Range: at least 30 feet
Bluetooth v2.1 compliant
CONNECTIONS
Bluetooth3.5mm Stereo input (AUX)
Instant transition from AUX to Bluetooth sound and back
TROUBLESHOOTING
If you experience any of the following issues, please try these quick steps to resolve the issue:
No sound:
-Ensure the speaker is charged fully.
-Ensure the speaker is switched on.
-Ensure your Bluetooth device is on and connected.
-Move your Bluetooth device closer to the Shaker
-Turn off your Bluetooth device and the Shaker then power them both back on