Asus P4SP-MX SE - Manual (Page 51)

ASUS P4SP-MX SE motherboard user guide 2-19
Graphics Aperture Size [64MB]
This feature allows you to select the size of mapped memory for AGP graphic data.
Configuration options: [4MB] [8MB] [16MB] [32MB] [64MB] [128MB] [256MB]
AGP Fast Write Capability [Enabled]
This field enables or disables the AGP 4x Fast Write Capability feature.
Configuration options: [Disabled] [Enabled]
Onboard VGA Shared Memory Size [32M]
This field allows you to set the onboard VGA memory size with the currently
installed memory. Configuration options: [32M] [64M]
Video Memory Cache Mode [UC]
USWC (uncacheable, speculative write combining) is a new cache technology for
processor video memory. This feature improves the display speed by caching the
display data. You must set this item to UC (uncacheable) if your graphics card
does not support this feature, otherwise the system may not boot.
Configuration options: [UC] [USWC]
PCI 2.1 Support [Enabled]
This field enables or disables the motherboard feature to support PCI 2.1 cards.
Configuration options: [Disabled] [Enabled]
Onboard PCI IDE [Both]
This field allows you to enable either the primary IDE channel or secondary IDE
channel, or both. You may also set both channels to [Disabled].
Configuration options: [Both] [Primary] [Secondary] [Disabled]
IDE Bus Master Support [Enabled]
This item controls the IDE Bus Master support for non-Windows ® operating
systems. Configuration options: [Disabled] [Enabled]