Dwyer 485B - Manual (Page 2)

DWYER INSTRUMENTS, INC.
Phone: 219/879-8000 www.dwyer-inst.com
P.O. BOX 373 • MICHIGAN CITY, INDIANA 46360, U.S.A. Fax: 219/872-9057 e-mail: [email protected]
©Copyright 2012 Dwyer Instruments, Inc. Printed in U.S.A. 1/12 FR# 02-443917-00
MENUS
HOLD
Maximum
Minimum
Memory
Engineering Units
Power Management
Memory Storage and Retrieval
HOLD will appear on the home screen when the HOLD button is pressed,
indicating the process reading has been frozen.
Push ENTER to see the maximum recorded reading. When viewing the
maximum recorded reading, hold ENTER for 4 seconds to clear.
Push ENTER to see the minimum recorded reading. When viewing the
minimum recorded reading, hold ENTER for 4 seconds to clear.
Press ENTER to see . Hold ENTER for 4 seconds to clear all stored
memory locations.
Press ENTER to see current engineering units. Press MEMORY/UP or
STORE/DOWN to select another unit.
Pu sh ENTER to see current time off setting. Select 30 or 10 values
indicating minutes for power to automatically shut-off. By selecting 0, the
auto shut-off is disengaged and the unit will only turn off manually by the
ON/OFF/LIGHT button.
From the home screen, push MEMORY/UP to view all previously stored
values. Cycle up or down through the stored data with the MEMORY/UP or
STORE/DOWN buttons. From the home screen, press STORE/DOWN to store
data points to memory. For both data storage and data memory retrieval,
press MENU to return to the home screen.
MAINTENANCE/REPAIR
Upon final installation of the Model 485B, no routine maintenance is
required. The Model 485B is not field serviceable and should be
returned if repair is needed. Field repair should not be attempted and
may void warranty.
WARRANTY/RETURN
Refer to “Terms and Conditions of Sales” in our catalog and on our
website. Contact customer service to receive a Return Goods
Authorization number before shipping the product back for repair. Be
sure to include a brief description of the problem plus any additional
application notes.