Avanti VINERA EWC1201 - Manual (Page 7)

7
OPERATING YOUR WINE CHILLER
It is recommended you install the Wine Chiller in a place where the ambient temperature is between
23º-26ºC/ 72º-78ºF. If the ambient temperature is above or below recommended temperatures, the
performance of the unit may be affected. For example, placing your unit in extreme cold or hot
conditions may cause interior temperatures to fluctuate. The range of 8º-18ºC/47º-65ºF may not be
reached.
Recommended Temperatures for Chilling Wine .
Red Wines 14º - 18º C 57– 65º F
Dry/White Wines 9º - 14º C 49 – 58º F
Rose Wines 10º - 11º C 51 – 53º F
Sparkling Wines 5º - 9º C 40 – 49º F
Temperature Ranges For Your Wine Chiller
Temperature Range 8 - 18º C 47 – 64º F
CONTROL PANEL

 Your Wine Cellar has been equipped with an “automatic” control panel lock, that will activate 12
seconds after the last time a button has been touched.
SETTING THE TEMPERATURE CONTROL
Push the and button simultaneously for 3 seconds to unlock the control panel. You will
hear a “BEEP” sound to alert you that the control is now active.
 You can set the temperature as you desire by pushing the or button on the control
panel for each zone. The temperature that you desire to set will increase 1ºF or 1ºC if you push
the button once, on the contrary the temperature will decrease 1ºF or 1ºC if you push the
button once.
 When you store mostly red wines, the temperature needs to be set at between 14º - 18ºC (57º -
65ºF). The indicator marked “RED” will light up in Red.
 When you store mostly white wines, the temperature needs to be set at between 9º - 14ºC (49º -
58ºF). The indicator marked “WHITE” will light up in White.
 When you store mostly sparkling wines, the temperature needs to be set at between 5º - 9ºC (40º
- 49ºF). The indicator marked “WHITE” will light up in White.
 NOTE:
• When you use the wine chiller for the first time or restart the wine chiller after having been shut off
for a long time, there could be a few degrees variance between the temperature you select and
the one indicated on the LED readout. This is normal and it is due to the length of the activation
time. Once the wine chiller is running for a few hours everything will be back to normal.
You can select temperature display setting from Fahrenheit to Celsius degree by pushing
this
button. (Fahrenheit or Celsius indicator will appear in green color) The degrees
will appear in blue color in the temperature display window.