Seametrics RMD10 - Manual

Sensor
Input
Pulse
Scaled
Power 4-20mA
Pulse
Pass-Thru
Lithium 3V
Battery
BLACK
RED
FT420
RMD10
GENERAL INFORMATION
RMD10
Battery-Powered Remote Totalizer
The RMD10 is a digital totalizer that can be conveniently
wall-mounted for use with SeaMetrics MJR meters that
are mounted in locations where the display is not easily
read. The RMD10 can also be used with FT415, FT420,
or other SeaMetrics controls when it is desirable to have
displays mounted at a second location (for instance, in a
large plant). The 8-character display is compact, durable,
and easily installed, with characters 1/3 inch in height.
The RMD10 operates on a 3 V lithium battery with an
operational lifespan of approximately 5 years (depending
on pulse frequency).
Mounting. Remove the two corner screws to access the
two mounting holes. Mounting screws not included.
FEATURES
• Digital totalizer
• Sturdy plastic housing
• Easy installation
• 5-year battery life
APPLICATIONS
• Remote display for
hard-to-read meter locations
8-digit, 1/3” character height
2.58” x 1.98” x 1.79”
(65.5 x 50.4 x 45.5 mm)
Lithium, 3V, 1.2 Ah, 2/3 A,
replaceable
Average battery life 5 years
(depends on pulse frequency)
-10˚C - 50˚ C (14˚ F - 122˚ F)
20 Hz maximum
Display
Housing Dimensions
Battery
Temperature Range
Frequency
SPECIFICATIONS
CONNECTIONS
RMD10 to FT420
SeaMetrics Incorporated • 19026 72nd Avenue South • Kent, Washington 98032 • USA
(P) 253.872.0284 • (F) 253.872.0285 • 1.800.975.8153 • www.seametrics.com
LT-13233-B
3/14/07
RMD10 to MJR Meter
RMD10
Cable From
MJR Meter
BLACK
RED
Lithium 3V
Battery
OB
SO
LET
E
(12/07)