AT&T Definity 7410 - Manual (Page 18)

To answer any 1 Pick up handset
intercom call
● You are connected to call
Note: If you are active on another call, first press
[
Hold ] , then press flashing [ xxxxx ]
Last Number Dialed
To automatically redial 1 Press [ Last Dialed ]
the last number you or Dial Last Number Dialed code
dialed (extension, outside (up to 24 digits) [ringback tone]
number, or trunk/feature
Wait for called party to answer
code)
2
Leave Word Calling (LWC)
To leave a message after 1 Press [ LWC ] before hanging up your handset
dialing an extension [confirmation tone]
(when your call is not
answered, you hear a
●
Message light goes on at called voice terminal
coverage or busy tone, Note: If reorder tone is heard, message is not stored;
or you have been put try again.
on hold)
Note: To do this,
you must have a
[
LWC ] button.
To leave a message 1 Press [ L W C ]
without ringing an or Dial Leave Word Calling code
extension [dial tone]
2 Dial extension [confirmation tone]
● Message light goes on at called voice terminal
15