AT&T Trimline 250 - Manual (Page 11)

10
FEATURE SETTINGS
Set Local Area Codes
You can program up to four Local Area Codes.
If you dial For Enter in Steps 2-4
11 digits All calls outside No Local Area Codes
(1 + area code + phone number) your home area code
10 digits Some calls outside Area codes that do
(area code + phone number) your home area code not require a “1”
If you dial 10 digits (area code plus phone number) for calls within your own area
code, include your area code as a Local Area Code.
1 Press and release N until the screen displays:
2 Press - until the screen displays the first digit of the area code.
Do not use the keypad to enter digits.
3 Press
D
.
4 Repeat Steps 2 and 3 for the second and third digits.
5 Press
D
.
6 To program a second Local Area Code, press
D
until the
screen displays:
7 Repeat Steps 2–5 to enter the digits of the area code.
8 Repeat Steps 6 and 7 to program a third and fourth Local Area
Code.
LAC2-___
LOCL AREA CODE?
LAC-___
LOCL AREA CODE?