Precision Control Systems DryIR 6020 - Manual (Page 5)

106920-001 Rev. 1 1-1
Section 1 – INTRODUCTION
The Model 6020 DryIR
®
Infrared line heater is designed for drying applications that
requires a clean, responsive, non-contact heat source.
Typical applications for the Model 6020 include:
Water-based drying
Solvent-based drying
Adhesive curing
The Model 6020 includes the following major components:
Heater Module – The heater consists of a polished aluminum reflector that directs the
infrared energy generated by two 1000-watt medium-wave quartz halogen lamps, that are
included with the heater. Heated widths of one-half, one, and two inches (13, 25, and 54
mm) are offered for the Model 6020, with a heated length of 10 inches. Additional lamps
can be ordered separately from the heater.
Air Cooling – An integrated fan blows air past the lighted lamps resulting in a heated air
impingement on the target product surface. When combined with quartz lamps, the result
is immediate evaporation and fast drying rates.