Precision Control Systems StripIR 5306B - Manual (Page 4)

1. 106837-001 Rev. 1 1-1
Section 1 – INTRODUCTION
The Model 5306B StripIR
®
Infrared line heater is designed for use in any application that
requires a clean, responsive, non-contact heat source.
Typical applications for the Model 5306B include:
Drying paint
Curing adhesive
Drying ink
Forming plastic
Stress relieving metal
Heat treating
The Model 5306B includes the following major components:
Heater Module – The heater consists of a specular aluminum reflector that directs the
infrared energy generated by one ceramic end-seal ‘T-3 style’ quartz halogen lamp
factory-installed in the heater. Heated lengths of 2.56, 5, 11, 16, 25, and 38 inches (65,
127, 279, 406, 635, and 965 mm) are offered for the Model 5306B. Additional lamps can
be ordered separately from the heater.
Water Cooling – Adequate cooling water is required during operation of the Model
5306B. Flexible tubing and plumbing fittings are supplied with each heater for easy
installation. Required cooling water flow rates are listed in Specifications.
Electrical Cable – The Model 5306B heater is electrically wired from the T3 lamp to
intermediate terminal block within the heater. An 8-foot (2.4 m) electrical cable is
supplied with each heater.
Optional Quartz Window – A quartz window can be ordered along with each size of the
Model 5306B. When installed in the heater, the quartz window protects the aluminum
reflector and lamp from contaminants released in the heating process, resulting in
maximum efficiency of the heater.