Speciﬁcations – Atlantic Technology AW-424 User Manual

Page 7

Instruction Manual

Speciﬁcations

Model

AW-424

Type

2-way with Sealed Indoor/Outdoor Speaker

Drivers Woofer

(2) 4 ½” (115mm) GLH

Tweeter

(1) 1” (25mm) soft dome

Frequency Response

70Hz – 20kHz ±3dB

Nominal Impedance

8 ohms

Crossover Frequency

3.5kHz, 3rd order

Sensitivity

88dB

Recommended Ampliﬁer Power 10 – 150 Watts RMS

Dimensions w/grille (W x H x D)

6.875 x 12.5 x 6.5” 175 x 320 x 166mm

Weight (ea)

12lbs; 5.5kg

IMPORTANT NOTE: The power recommendation for these speaker systems assumes that you

will not operate your ampliﬁer/receiver in a way that produces distortion. Even rugged speak-

ers like ours can be damaged by an ampliﬁer driven into audible distortion. The harsh ampliﬁer

distortion (“clipping”) that occurs in this situation will eventually cause damage to the speaker

system. This type of damage may be cumulative and can build up over time, as the ampliﬁer is

driven into overload again and again. Such damage is easily identiﬁable through examination

of the damaged speaker’s voice coil and is not covered by the warranty.

Speciﬁcations are those in effect at the time of printing. As part of our ongoing program of

continuous product improvement, Atlantic Technology reserves the right to change speciﬁca-

tions or appearance at any time without notice.