Audiovox Prestige PAV-1 - Manual (Page 4)

-2-
3
SELECT BUTTON (SEL)
This button is used to select the audio function (bass, treble,
balance, or fade) to be adjusted using the Level control 2
.
Pressing the Select button once will set the unit for bass
adjustment (BAS indication highlighted on display panel).
Pressing the button additional times will select treble adjustment
(TRE highlighted on display), balance (BAL) or fader (FAD).
The display will automatically return to the normal indication
5 seconds after the last adjustment is made or when another
function is activated.
4
BASS CONTROL
To adjust the bass level, first select the Bass mode by pressing
the Select button 3
until the BAS indication is highlighted on
the display panel. Within 5 seconds of choosing the Bass mode,
press the + or - side of the Level control 2
to adjust the bass
response as desired. The bass level will be shown by the bars
on the display panel from a minimum of L
I IIIII I IIIIII
H to a
maximum of L
IIIIII I IIIII I H (L
IIIIII I IIIIII
H represents flat
response). The display will automatically return to the normal
indication 5 seconds after the last adjustment or when another
function is activated.
5
TREBLE CONTROL
To adjust the treble level, first select the Treble mode by press-
ing the Select button 3
until the TRE indication appears on the
display panel. Within 5 seconds of choosing the Treble mode,
press the + or - side of the Level control 2
to adjust the treble
response as desired. The treble level will be shown by the bars
on the display panel from a minimum of L
I IIIII I IIIIII
H to a
maximum of L
IIIIII I IIIII I H (L
IIIIII I IIIIII
H represents flat
response). The display will automatically return to the normal
indication 5 seconds after the last adjustment or when another
function is activated.
6
LEFT/RIGHT BALANCE CONTROL
To adjust the left-right speaker balance, first select the Balance
mode by pressing the Select button 3
until the BAL indication
appears on the display panel. Within 5 seconds of choosing the
Balance mode, press the - side of the Level control 2
to adjust
the stereo balance to the left channel speakers or the + side of
the control to adjust it to the right channel speakers. The balance
position will be shown by the bars on the display panel from
L
I IIIIII I IIIIII
R (full left) to L
IIIIII I IIIII I R (full right). When
the volume level between the left and right speakers is equal,
L
IIIIII I IIIIII
R will be shown on the display panel. The display
will automatically return to the normal indication seconds after
the last adjustment or when another function is activated.
7
FRONT/REAR FADER CONTROL
To adjust the front-rear speaker balance, first select the Fader
mode by pressing the Select button 3
until the FAD indication
appears on the display panel. Within 5 seconds of choosing the
Fader mode, press the + or - side of the Level control 2
to
adjust the front-rear speaker levels as desired. The fader
position will be shown by the bars on the display panel from
F
I IIIIII I IIIIII
R (full front) to F
IIIIII I IIIII I R (full rear). When
the volume level between the front and rear speakers is equal,
L
IIIIII I IIIIII H will be shown on the display panel. The
display will automatically return to the normal indication 5
seconds after the last adjustment or when another function is
activated.