KROHNE OPTIWAVE 6300 IECEx - Manual (Page 10)

2
INSTALLATION
10
OPTIWAVE 6300 C
www.krohne.com 10/2010 - 4001046701 - AD IECEX OPTIWAVE6300 R01 en
EPL Gb:
Ex ia and Ex d[ia] devices - with the 4...20 mA output option
Zone 20: Ex iaD devices only
Zone 21/20: Ex iaD and Ex tD[iaD] devices
Temperature
class
Ambient temperature Flange temperature
Drop and horn antennas Drop and horn antennas with
the distance piece
[°C] [°F] [°C] [°F] [°C] [°F]
T6 -40…+57 -40…+134 -40…+57 -40…+134 -50…+60 1 -58…+140 1
-40…+47 -40…+116 -40…+51 -40…+124 -50…+85 1 -58…+185 1
T5 -40…+72 -40…+161 -40…+72 -40…+161 -50…+75 1 -58…+167 1
-40…+62 -40…+143 -40…+66 -40…+151 -50…+100 1 -58…+212 1
T4 2 -40…+80 -40…+176 -40…+80 -40…+176 -50…+85 1 -58…+185 1
-40…+74 -40…+165 -40…+79 -40…+174 -50…+100 1 -58…+212 1
-40…+70 -40…+158 -40…+74 -40…+165 -50…+110 1 -58…+230 1
-40…+60 -40…+140 -40…+68 -40…+154 -50…+135 1 -58…+275 1
T3 3 -40…+54 -40…+129 -40…+64 -40…+147 -50…+150 1 -58…+302 1
- - -40…+57 -40…+134 -50…+180 1 -58…+356 1
- - -40…+52 -40…+125 -50…+200 1 -58…+392 1
1 Min. -50°C / 58°F, if an EPDM gasket is used. Min. -20°C / -4°F, if a Kalrez® 6375 gasket is used. Min. -40°C / -40°F, if an FKM/FPM
gasket is used. Min. -30°C / -22°F, if a Metaglas® feedthrough is used. Min. -50°C / 58°F, if a PEI feedthrough is used.
2 Max. flange temperature is +100°C / +212°F, if the PP Drop antenna is used
3 Do not use this temperature class for the PP Drop antenna. Max. flange temperature is +150°C / +302°F, if the PTFE Drop antenna is
used.
Ambient temperature Flange temperature
[°C] [°F] [°C] [°F]
-40…+85 -40…+185 -50…+200 1 -58…+392 1
1 Max. flange temperature is +100°C / +212°F, if PP Drop antenna used. Max. flange temperature is +150°C / +302°F, if the PTFE Drop or
the Hygienic antenna is used. Min. -50°C / -58°F, if an EPDM gasket is used. Min. -20°C / -4°F, if a Kalrez® 6375 gasket is used.
Min. -40°C / -40°F, if an FKM/FPM gasket is used. Min. -30°C / -22°F, if a Metaglas® feedthrough is used. Min. -50°C / -58°F, if a PEI
feedthrough is used.