AEG 5 - Manual (Page 4)

10
Connecting the suction tubes
Join the two tubes.
Adjust the Telescopic Tube (depending on
model)
Attaching the suction hose
Insert the suction hose connector in the suction
inlet. It locks in place and can be rotated all the
way around.
Press the release button and pull out the
connector in order to remove the suction hose.
Mains connection/Cable rewind
The mains cable is in the cable compartment.
Pull out the cable and insert the plug into the
mains socket. Remove plug from the mains
socket. Press the foot button; the cable rewinds
automatically when vacuuming has been
completed.
Using the nozzles
Using the floor nozzle*
For the daily care of carpets and hard floors.
Without being changed over manually, the floor
nozzle is entirely suited for daily vacuuming of
carpets and hard floor surfaces such as parquet,
tiles, linoleum, etc.
Using the floor nozzle*
For the daily care of carpets and hard floors. The
floor nozzle may be changed over manually. The
brushes can be extended for smooth floors and
retracted for carpets.
Crevice and upholstery nozzle stored in the
appliance
For specific cleaning requirements, two
additional parts are included with the vacuum
cleaner in an integrated accessories
compartment*.
Open the compartment by pressing gently as
shown in the figure.
The nozzles may be attached to the suction tube
or the handle on the suction hose, depending on
requirements.