AT&T 6100 - Manual (Page 6)

INSTALLATION
5
4 Charge the handset battery.
Place the handset in the base. Charge the battery for at least 24 hours
the first time. After the first charge, the battery is typically fully
charged overnight.
5 Check for dial tone.
After the batteries are charged, pick up the handset and press
P;
you should hear a dial tone.
Standard
electrical outlet
Modular
telephone
jack
1 Connect the
telephone line
cord.
2 Connect the power cord. 3 Connect microphone
and speaker cords.
6100_book_1ATT 11/25/00 12:37 PM Page 5