KROHNE ALTOFLUX 2W IFM 4042K - Manual (Page 5)

KROHNE Messtechnik GmbH & Co. KG · Ludwig-Krohne-Str. 5 D-47058 Duisburg 5/10
Tel.: 0203-301 0 Fax: 0203-301 389 · e-mail: [email protected]
Remote Operation Instructions IFC040 HART
Attachment A
1 Process
Variables
2 Operation
3 Test
4 Installation
5 Quit/Reset
6 HART
Variables
1 Raw Flow
2 Smoothed Flow
3 Positive Totalizer
4 Negative Totalizer
5 Current Output Value
6 PV %Range
1 Full Scale
2 Time Constant
3 Cutoff ‘On’ value
4 Cutoff ‘Off’ value
5 Display
IFC040 Menu Tree HC275
KROHNE IFC040 45e90101
1 Flow Units
2 loc Flow Format
3 Totalizer Units
4 loc Totalizer Format
1 ID Number
2 Dynamic Status
1 ID Number
2 Dynamic Status
1 ADC
2 I/O
3 Display
4 HART
1 Loop Test (M)
2 Hardware Info
3 Sensor Limits
1 Upper Sensor Limit
2 Sensor Min Span
1 Apply values (M)
2 Zero trim (M)
3 HART
1 Tag
2 Device Id
3 Field Device Rev
4 Software Rev
5 Hardware Rev
6 Message
7 Descriptor
8 Date
9 Final asmbly num
10 PV Sensor serial num
11 Polling address
Designations:
loc – Local HC275 variable, that is not read/written to instrument;
(M) – Method is invoked to retrieve/change data.
1 ID Number
2 Dynamic Status
1 Counter reset (M)
2 Error reset (M)
3 Master reset (M)
1 ID Number
2 Dynamic Status
1 I 4 mA Trim (M)
2 I 20 mA Trim (M)