KROHNE OPTISWITCH 5200C Transistor EN - Manual (Page 11)

1
Fig. 3: Horizontal mounting
1 Switching point
1
2
Fig. 4: Horizontal mounting (recommended installation location - particularly for
adhesive products)
1 Switching point
2 Marking with screwed version on top - with flange versions directed to the
flange holes
With flange versions, the fork is directed to the flange holes in
the following way.
Fig. 5: Fork position with flange versions
Use the recommended cables (see chapter "Connecting to
power supply") and tighten the cable gland.
You can give your OPTISWITCH 5200 C, 5250 C additional
protection against moisture penetration by leading the con-
nection cable downward in front of the cable entry. Rain and
Moisture
OPTISWITCH 5200 C, 5250 C - with transistor output 11
Mounting
30432
-EN
-060831