KROHNE OPTISWITCH 3300C ARV33 unpressurized EN - Manual (Page 8)

6 Dismounting
6.1 Dismounting procedure
Note chapter "Mounting" and carry out the described steps in
reverse order.
If you proceed as follows, it is not necessary to readjust the
switching point and the lock fittings must not be dismounted
completely.
1 Switch off power supply of the sensor
2 Remove all connection cables
3 Loosen lock fitting with a screwdriver
4 Remove the sensor together with the lock fitting
6.2 Disposal
The ARV 67 consists of materials which can be recycled by
special recycling companies. Mark the instrument as scrap
and dispose it according to the legal regulations.
Materials: see "Technical data"
If you cannot dispose of the instrument properly, please
contact us about disposal methods or return.
8 Lock fitting ARV 67 - unpressurised for OPTISWITCH 3300 C
Dismounting
30924
-EN
-050704