KROHNE OPTISWITCH 3200C Transistor EN - Manual (Page 9)

3.3 Operation
With the factory setting, products with a density of >0.02 g/cm³
(>0.0008 lbs/in³) can be measured. The instrument can also
be adapted to products with lower density >0.008 g/cm³
(>0.0003 lbs/in³).
On the electronics module you will find the following indicating
and adjustment elements:
l
signal lamp for indication of the switching condition (green/
red)
l
potentiometer for adaptation to the product density
l Mode switch for selecting the switching condition (min./
max.)
3.4 Storage and transport
Your instrument was protected by packaging during transport.
Its capacity to handle normal loads during transport is assured
by a test according to DIN 55439.
The packaging of standard instruments consists of environ-
ment-friendly, recyclable cardboard. In addition, the sensor is
provided with a protective cover of cardboard. For special
versions PE foam or PE foil is also used. Dispose of the
packaging material via specialised recycling companies.
l
Storage and transport temperature see "Supplement -
Technical data - Ambient conditions"
l Relative humidity 20 … 85 %
Packaging
Storage and transport tem-
perature
OPTISWITCH 3200 C - with transistor output 9
Product description
29958
-EN
-060830