Ayre Acoustics AX-7 - Manual (Page 7)

tape outputs are switched on and off at the front
panel. Please refer to the section “Controls and
Operation” for further information.
If a recorder is not installed in
your system, the “Moon” input
performs exactly like the other
unbalanced inputs.
If you are connecting a recorder to your
system, be sure to connect its outputs to
the “Moon” input of the AX-7.
This will prevent the undesired possibility of
creating a feedback loop when making a recording.
Loudspeaker Outputs
The heavy-duty output
terminals of the Ayre AX-7
work best with speaker cables
using spade lugs.
The Ayre AX-7 drives the loudspeakers with
balanced outputs. Since none of the output
terminals are grounded, connecting any of them to
ground may result in damage to the amplifier.
D o n o t c o n n e c t t h e l o u d s p e a k e r
outputs to any speaker switch-box,
accessory, or test equipment that has a
common ground connection.
5
Volts
50/60 Hertz
300 W Max
Tape Out
S2 S2 S1 S1
B2 B2 B1 B1
¡Attention — Balanced Outputs Do Not Connect Output Terminals to Ground! —
AX-7 Integrated Amplifier
A y r e
Boulder, Colorado USA
Right Channel Left Channel
S.N.