KROHNE OPTIFLEX 1300 C WHG EN - Manual (Page 9)

OPERATION
5
9
OPTIFLEX 1300 C
www.krohne.com 01/2013 - 4002495301 - AD WHG OPTIFLEX 1300 R01 en
5.2.2 Save function
When you use the LCD display option to change the device configuration, it is necessary to
confirm your settings 2 times. Push [^
^ ^ ^] to confirm.
5.3 Special conditions for PACTware™ (DTM)
5.3.1 General notes
The device has a Device Type Manager (DTM – device driver) for use with the PACTware™
software tool. You can monitor WHG status and change the device configuration from a remote
workstation. If the device is in "WHG" mode, this data is shown in PACTware™.
The DTM has the same menu structure as the LCD display option. If the device is approved for
WHG applications, some parameters cannot be changed. For more data, refer to
Device settings
(LCD display option) on page 8.
Figure 5-1: Steps to save data (WHG-approved devices)
Figure 5-2: WHG mode in PACTware