Safety instructions – KROHNE GA 24 ATEX II2G Ex i EN User Manual

Page 3

SAFETY INSTRUCTIONS

GA24

www.krohne.com

06/2013 - 4000836702 - MA G24-Ex-II2G-AD R03 en

Safety instructions

1.1 General notes

These additional instructions apply to explosion-protected versions of variable area flowmeters
with electrical built-ins and the marking II 2 G. They complete the installation and operation
instructions for the non-explosion protected versions.

The information given in these instructions contains only the data relevant to category 2
explosion protection. The technical details given in the installation and operation instructions for
the non-explosion protected versions apply unchanged unless excluded or superseded by these
instructions.

1.2 EC conformity

The manufacturer declares with the EC Declaration of Conformity on his own responsibility
conformity with the protection goals of Directive 94/9/EC for use in hazardous areas with gas.
The EC Type Test Certificate of the Physikalisch Technische Bundesanstalt (PTB) forms the basis
of the EC Declaration of Conformity: Conformity with the harmonised standards was verified
according to EN 60079-0:2009 and EN 60079-11:2012.

If required the EC Type Test Certificate can be downloaded under www.krohne.com.

1.3 Security information

Assembly, installation, start-up and maintenance may only be performed by personnel trained in
explosion protection!

PTB 05 ATEX 2025 X

CAUTION!
The operator respectively his agent is responsible to follow further standards, directives or laws
if required due to operating conditions or place of installation. This applies particularly for the
use of easy detachable process connections such as SMS or Clamp when measuring flammable
mediums.

AD_GA24_II2G_R03_en_4000836702_PRT.book Page 3 Wednesday, June 26, 2013 2:30 PM